Filters
-
CleanAIR Set of Odour Prefilters for AerGO PAPR units - pack of 10 (10 replacements)
CleanAIR Odour Pre-filter for Basic PAPR - 10 pcs Suitable for use with the CleanAIR BASIC PAPR Unit (R810000PA)
$59.89
-
CleanAIR Replacement Set of Prefilters for Basic PAPR unit - pack of 10 prefilters
CleanAIR Prefilter for Basic EVO - 10 pcs
$34.00
-
CleanAIR Replacement P3 Particulate Filters for Basic PAPR unit - pack of 2 filters (2 sets of replacements)
CleanAIR P3 Filter for Basic PAPR - 2 pcs Expiry: 10 years from date of manufacture
$137.03
-
Maxiguard Maxiguard P2 Particulate Prefilter – pack of 5 pairs
Always keep a clean pre-filter fitted to your main filter, and you can be sure of longer filter life. Superb low-cost protection against liquid splashes and coarse particles before they reach the main filter. Use a pre-filter at all times. Great effect at a tiny cost. Its the smartest thing you can do. Certified to AS/NZS 1716. Certified to EN143:2000 Particulate Filter Provides protection against Particulates (P2), including those containing oils To be fitted with the MaxiGuard Series Cartridges (R701-A1 & R703-ABEK1) and Prefilter Holder (R510) Packs of 5 pairs (10 filters) Expiry: 5 years from date of manufacture
$33.28
-
Maxiguard Maxiguard Particulate Hard Case Filter P3
Features & Benefits Suitable for use with: R7500 MaxiGuard Silicone Half Mask & R680 & R690 MaxiGuard Silicone Full-Face Mask Enhanced Protection: The solid design of the hard case provides superior protection by reducing the risk of premature clogging. This ensures a longer lifespan and optimal performance. Decontamination Support: The protective casing enables efficient decontamination practices. This feature helps maintain a clean and sanitized environment, ensuring the safety of users and minimising contamination risks. Ergonomic Design: R793-P3R offers a low profile and well-balanced design, allowing for maximum comfort and ease of use. It ensures a snug fit while maintaining optimal breathing capacity. Unmatched Safety: The hard case effectively deflects sparks and splashes of liquid. Whether in hazardous work environments or situations where unexpected accidents may occur, R793-P3R provides an additional layer of protection for peace of mind. Convenient Self-Fit Check: The hard case simplifies the process of performing a quick self-fit check. This feature ensures that users can easily verify the proper fit and ensure optimal protection without any hassle or complexity. Feather-Light Comfort: Incredibly lightweight, R793-P3R prioritises comfort without compromising on safety. The lightweight design minimises strain and fatigue during extended use, allowing users to focus on their tasks with maximum comfort and freedom of movement. Secure Locking Mechanism: A reliable bayonet connector ensures a secure locking mechanism. This guarantees a tight and dependable seal, preventing any unwanted leakage or infiltration, and allowing users to work confidently in various environments. Certified to AS/NZS 1716:2012 Expiry: 5 years from date of manufacture ApplicationsCommon Hazards: For protection when working with a range of particles produced from grinding, cutting, drilling and sanding.
$34.80
-
Maxiguard Maxiguard ABEK Multi-gas & Pariticulate Filter P3
Features & Benefits Suitable for use with R7500 MaxiGuard Silicone Half Mask (P2 only) & R680 & R690 MaxiGuard Silicone Full-Face Mask Secure Locking Mechanism: A reliable bayonet connector ensures a secure locking mechanism. This guarantees a tight and dependable seal, preventing any unwanted leakage or infiltration, and allowing users to work confidently in various environments. Streamlined Design: Enhancing convenience and usability, R703-ABEK1P3 incorporates a particulate filter that is permanently attached to the cartridge. Eliminating the hassle of separate components. Feather-Light Comfort: Incredibly lightweight, R703-ABEK1P3 prioritises comfort without compromising on safety. The lightweight design minimises strain and fatigue during extended use, allowing users to focus on their tasks with maximum comfort and freedom of movement. Low Breathing Resistance: Engineered to minimise breathing resistance, allowing for effortless and unrestricted airflow. This feature enhances user comfort and promotes a natural breathing experience, making it easier to perform tasks without feeling restricted or strained. Comprehensive Protection: R703-ABEK1P3 offers broad coverage by providing multi-gas and particle protection. With this versatile filter, you can confidently tackle a wide range of hazards, ensuring your safety and well-being in various environments. Certified to AS/NZS 1716:2012 Expiry: 5 years from date of manufacture Applications Common Hazards: For protection when working with a variety of chemicals such as Organic vapours with B.P.>65°C, chlorine, hydrogen sulphide, hydrogen cyanide, sulphur dioxide, acid gases, ammonia, methylamine, and particles reusable.
$65.61
-
Maxiguard Maxiguard ABEK1 Chemical Cartridge with P2 Prefilter Combination – pack of 1 pair
Product FeaturesSuitable for use with:- R7500 MaxiGuard Silicone Half Mask- R680 & R690 MaxiGuard Silicone Full-Face Mask Certified to AS/NZS 1716. Certified to EN143:2000 ABEK1 Particulate filter permanently attached to cartridge Bayonet connector ensures secure locking Low profile, twin filter design Organic gas filter - Class A1 Used against vapour from organic substances whose boiling point exceeds +65°C (150F) Plastic polypropylene. No metal parts If environment contains both particles and gas, a particle filter must be fitted to the front of the gas filter Packaged as 1 pair of filters Prefilter Code: R7N11-P2 Expiry: 5 years from date of manufacture ApplicationsCommon Hazards: For protection when working with a variety of chemicals such as organic vapours, chlorine, hydrogen chloride, sulphur dioxide, hydrogen fluoride, hydrogen sulphide, ammonia, methylamine, and formaldehyde
$52.92
-
Maxiguard Maxiguard ABEK1 Chemical Cartridge – pack of 1 pair
Product FeaturesSuitable for use with:- R7500 MaxiGuard Silicone Half Mask- R680 & R690 MaxiGuard Silicone Full-Face Mask Certified to AS/NZS 1716. Certified to EN143:2000 ABEK1 Particulate filter permanently attached to cartridge Bayonet connector ensures secure locking Low profile, twin filter design Organic gas filter - Class A1 Used against vapour from organic substances whose boiling point exceeds +65°C (150F) Plastic polypropylene. No metal parts If environment contains both particles and gas, a particle filter must be fitted to the front of the gas filter Packaged as 1 pair of filters Prefilter Code: R7N11-P2 Expiry: 5 years from manufacture Applications:Common Hazards: For protection when working with a variety of chemicals such as organic vapours, chlorine, hydrogen chloride, sulphur dioxide, hydrogen fluoride, hydrogen sulphide, ammonia, methylamine, and formaldehyde
$44.95
-
CleanAIR Maxiguard A1 Organic Vapour Cartridge w/ P2 Prefilter Combination – pack of 1 pair
Features and BenefitsSuitable for use with:- R7500 MaxiGuard Silicone Half Mask- R680 & R690 MaxiGuard Silicone Full-Face Mask Certified to AS/NZS 1716 Certified to EN143:2000 A1 Particulate filter permanently attached to cartridge Bayonet Connector ensures secure locking Low profile twin filter design Organic gas filter class A1 with P2 Prefilter comboUsed against vapour from organic substances whose boiling point exceeds +65°C (150F) Plastic polypropylene. No metal parts If environment contains both particles and gas, a particle filter must be fitted to the front of the gas filter Packaged as 1 pair of filters Expiry: 5 years from date of manufacture Applications Common Hazards: For protection when working with solvents and formaldehyde Chemical Processing Healthcare Asbestos removal Plastic production Laboratory work Painting waterbase or oilbase paints
$40.60
-
CleanAIR Filter for CleanAIR Pressure Conditioner
Product FeaturesReplacement filter for CleanAIR Pressure Conditioner ApplicationRemoves solid particles, oil mist and unpleasant odours which are present in the compressed air distribution system. Compatible Accessories & Spare PartsCompatible with CleanAIR Pressure Conditioner with stand & filter (R610050) Expiry: 10 years from date of manufacture
$201.99
-
CleanAIR Rubber filter cover for CleanAIR DIN thread filters
Rubber filter cover for CleanAIR DIN thread filters Can be used for below filters: R500357R500557R500168R500157R500048R560010R500166R500164R500167
$30.45
-
CleanAIR P3 particulate filter to suit CleanAIR Asbest PAPR units
P3 particulate filter to suit CleanAIR Asbest PAPR units Expiry: 10 years from date of manufacture
$45.68
-
CleanAIR Maxiguard Prefilter Holder – pack of 1 pair
Used to hold MaxiGuard Particulate PreFilters (R7N11-P2) in place on top of MaxiGuard Gas Cartridges Pack of 2
$7.25
-
CleanAIR A3AXP3 combined filter, with DIN thread RD40x1/7
To suit CleanAIR Chemical 2F PAPR Unit (R51E000FC)Expiry: 10 years from date of manufacture
$131.95
-
CleanAIR A2B2E2K2Hg P3 combined filter, with DIN thread RD40x1/7
CleanAIR® Filter RA2B2E2K2HgP3, thread RD40x1/7 provides protection against a combination of contaminants in the form of gases, vapours and solid and liquid particles & mercury. Expiry: 10 years from date of manufacture
$97.44
-
CleanAIR Prefilter for Canister Filters
Prefilter for Canister Filters - 10 pcs Prefilter + Keeper Expiry: 10 years from date of manufacture Can be used for below filters: R500357R500557R500168R500157R500048R560010R500166R500164R500167
$36.54
-
CleanAIR Pre-filter Keeper for DIN Thread Filters
Pre-filter Keeper for Chemical 2F/3F. Can be used for below filters: R500357R500557R500168R500157R500048R560010R500166R500164R500167
$15.23
-
CleanAIR Set of combined filters ABEK1 P3 combined filters to suit AerGO PAPR unit
Set of combined filters ABEK1 P3 to suit AerGO PAPR unit Provides protection against both particles and gases Can be fitted with pre-filters, odour filters and spark arresters for relevant applications Filtration of particles and also gases that fall under ABEK1 classification Expiry: 10 years from date of manufacture
$201.99
-
CleanAIR Set of combined ABE1 P3 combined Ozone filters to suit AerGO PAPR unit
Set of CleanAIR® filters ABE1 P3 combined Ozone filters to suit AerGO PAPR unit To suit AerGO® Unit (RPA530 & RPA530-HD) 1 pair Expiry: 10 years from date of manufacture
$182.70
-
CleanAIR Set of combined filters A1 P3 combined filters to suit AerGO PAPR unit
Set of CleanAIR® A1 P3 combined filters to suit AerGO PAPR unit To suit AerGO® Unit (R300000PA & R300000PHA) Expiry: 10 years from date of manufacture
$137.03
-
CleanAIR Filter cover & spark arrester, pre-filter (set of 2+2+2)-to suit AerGO
Filter cover and spark arrester (set of 2+2)
$38.06
-
$61.92
-
CleanAIR Prefilter CA AerGO (set of 10)
Prefilter CA AerGO (set of 10) Expiry: 10 years from date of manufacture
$21.32
-
CleanAIR AerGo Replacement P3 Particle filter - 2 pairs
AerGo Replacement P3 Particle filter - 2 pairs Expiry: 10 years from date of manufacture
$126.88
You have seen 24 out of 38 products